Iron Oxide Yellow 313 |
Specification: |
Acidity of water extract, ml: 12.5 |
|
Matter volatile at 105 degrees centigrade (m/m)<%: 0.8 |
|
Water soluble matter (m/m)<%:0.4 |
|
Sieve residue on 0.045mm (m/m)<%:0.3 |
|
PH of water suspension: 3.8 |
|
Oil Absorption: 30 |
|
Fe2O3 (m/m) >%:87 |
|
Relative dyeing ability (against GB Standards ) %:100 |
Iron Oxide Yellow 313A |
Specification: |
Fe2O3 Content > %: 86 |
|
Water Soluble Matter(m/m) < %: 0.5 |
|
Oil Absorption < %: 35 |
|
Fineness (Residue on 320 Mesh Sieve) < %:0.3 |
|
Matter Volatile at 105oC < %: 1.0 |
|
Ignition Loss < %: 14 |
|
Tinting Strength > %:95 |
|
PH value: 4-7 |
Iron Oxide Yellow 313B |
Specification: |
Acidity of water extract, ml: 12.1 |
|
Matter volatile at 105 degrees centigrade(m/m) < %: 0.9 |
|
Water soluble matter(m/m) < %:0.4 |
|
Sieve residue on 0.045mm (m/m)<%:0.3 |
|
PH of water suspension: 3.8 |
|
Oil Absorption: 30 |
|
Fe2O3 (m/m)>%:87.5 |
|
Relative dyeing ability (against GB Standards ) %:100 |
Iron Oxide Yellow 313C |
Specification: |
Matter volatile at 105 degrees centigrade (m/m)<%: 0.8 |
|
Water soluble matter% : 0.15 |
|
Sieve residue on 0.045mm (m/m) < %:0.3 |
|
PH of water suspension: 5.2 |
|
Fe2O3 (m/m) > %:87.1 |
|
conductivity us/cm: 175 |
Iron Oxide Yellow 313D |
Specification: |
Fe2O3 Content < %: 86 |
|
Water Soluble Matter(m/m) < %: 0.5 |
|
Oil Absorption < %: 35 |
|
Fineness (Residue on 320 Mesh Sieve) < %:0.3 |
|
Matter Volatile at 105oC < %: 1.0 |
|
Ignition Loss < %: 14 |
|
Tinting Strength > %:95 |
|
PH value: 4-7 |